Name: BC120-8T
Brand: SZBCBK
SKU: BC120-8T

How It Works

The cam-driven chain circulates the stations continuously — precise positioning on the straight sections, smooth turning around the curves.

01
Precise positioning on straightsStations dwell on the straight sections with micron-level repeatability.
02
Smooth turning on curvesCam-driven transition keeps the chain circulating without interruption.
03
Constant station pitchEqual spacing between stations for synchronized multi-station operation.

Technical Parameters

Remark: Standard length can be over 4000mm.

Dust Cover Configuration
- Dust covers / dust caps of the same outer dimension are optional
- Suitable for environments with dust, flying debris and high cleanliness requirements
- Interchangeable with standard models; can be retrofitted at a later stage
Polymer Self-lubrication
- Self-lubricating structure made of polymer material for low-noise operation
- No frequent oiling maintenance required
- Ideal for pharmaceutical, food and clean workshop applications
Custom Mounting Holes
- Bracket fixing holes on chain links can be customized as required
- Technical team provides continuous support during the engineering phase
- Until the installation drawings are finalized
Double-row / Parallel Drive
- Two independent beams mounted on one support frame
- Can run synchronously on a common shaft or operate separately
- Suitable for processing products with large transverse dimensions

Multiple specifications are available. Pitch and mounting methods can both be matched according to working conditions.

Vertical Mounting
When the BC series precision link conveyor module is mounted vertically, the drive end and idler end are located by support bases. The remaining support bases mount to the main body and are located with M10 threaded holes and Φ10 dowel pin holes. Place one support base every 640-800 mm.
Horizontal Mounting
When the BC series precision link conveyor module is mounted horizontally, the drive end and idler end are located by support bases, while the intermediate support bases carry the load. Fix them using the M8 threaded holes and Φ8 dowel pin holes on both sides, with one support base every 640-800 mm.